Winslow: (207) 873-2366 Newport: (207) 368-2220
VISA MasterCard American Express Discover

Instant Garages

You are currently viewing properties from our Instant Garages category. Clicking on a thumbnail or the "more information" link will allow you to view more detailed information about a specific property.

12'W x 20'L x 8'H

MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

Vehicle protection and storage
Equipment / material storage
Workshop areas.

Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with earth anchors with a 36” stainless steel tether and a drive rod to secure the unit at 6 strategic points.

EXCLUSIVE HOUSE STYLE FEATURES:

Heavy Duty Galvanized Finish on All Steel Frame Components for Maximum Strength & Long Life
Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Four(4) Bungee Cord Tie Backs for Doors
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment - easily unloaded and transported
Average Install time - 2 hours

STANDARD SPECIFICATIONS

Nominal Size - 12’ Wide x 20’ Long x 8’ High
Arches - Six(6) on 48” Spacing 1 5/8” Frame Members
Standard End Door Size - 10’ Width X 6ft Height
Available Colors - Outer Colors: Forest Green, Grey, and Tan All Interiors: White Only
Shipping Weight - 295 lbs shipped in Two(2) boxes Shipped via Motor Freight
Box Dimensions - Box 1: 63.5" Long x 17.5" Wide x 7.5" High Box 2: 66.5" Long x 20.5" Wide x 8.75" High
Main Cover - UV Protected Fabric Backed Poly Material 10 0z. Weight. 24 Mil. thick.
Fire Retardant Standard - Main Cover & Doors meet CPAI -84 Section 5
Anchors - Six(6) 36” Anchors with U-Bolts & Drive Rod Std.
Stock Number - Round Style: 12x20x8(*)RSK * - Color Prefix: Green, Grey, Tan, etc.


Similar Products:

12 x 20 x 8 "House style" instant garage
14 x 24 x 10 "Round style" boat / SUV garage
12 x 12 x 8 "House

More Information

12'W x 20'L x 8'H

ROUND STYLE
12'W x 20'L x 8'H
- UV Protection
- Fire Rated (CPAI -84 Section 5)
- Our most popular size and color!

MDM Products, LLC provides the best in instant and portable protection for any purpose.
Typical uses include:
Vehicle protection and storage
Equipment / material storage
Workshop areas.
Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with earth anchors with a 36” stainless steel tether and a drive rod to secure the unit at 6 strategic points

EXCLUSIVE ROUND STYLE FEATURES:
Heavy Duty Galvanized Finish on All Steel Frame Components for Maximum Strength & Long Life

Easy Bolt Together Design - all Pre-drilled & Cut
Wind Brace Support on Both Sides
Two(2) Double Zipper Doors with Bottom Pockets
Four(4) Bungee Cord Tie Backs for Doors
Protective Plastic Tube End Caps - All Open Ends
Standard Thread Plated Hardware Kit with Retaining Nuts & Protective SS Washers
Quick Assembly Wrench included
Heavy Duty Poly Rope for Main Cover Tie Down
Heavy Duty Grommets on Cover & Doors
Two Box Shipment - easily unloaded and transported
Average Install time - 2 hours

Nominal Size 12’ Wide x 20’ Long x 8’ High Arches Six(6) on 48” Spacing 1 5/8” Frame Members Standard End Door Size 10’ Width X 6ft Height Available Colors Outer Colors: Forest Green, Grey, and Tan
All Interiors: White Only Shipping Weight 289 lbs shipped in Two(2) boxes Shipped via Motor Freight Box Dimensions Box 1: 58.5" Long x 15.5" Wide x 7" High
Box 2: 66.5" Long x 20.5" Wide x 8.75" High Main Cover UV Protected Fabric Backed Poly Material 10 0z. Weight Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5 Anchors Six(6) 36” Anchors with U-Bolts & Drive Rod Std. Stock Number Round Style: 12x20x8(*)RSK
* - Color Prefix: Green, Grey, Tan, etc.

More Information

12'W x 24'L x 8'H

UV Protection
Fire Rated
(CPAI -84 Section 5)
Easy Bolt Together Assembly
MDM Products, LLC provides the best in instant and portable protection for any purpose

Typical uses include:
* Vehicle protection and storage
* Equipment / material storage
* Workshop areas.

The house style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36" stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.

EXCLUSIVE EXTENDED STORAGE FEATURES:
* Heavy Duty Galvanized Finish on All Steel Frame Components for Maximum Strength & Long Life
* Easy Bolt Together Design - all Pre-drilled & Cut
* Wind Brace Support on Both Sides
* Two(2) Double Zipper Doors with Bottom Pockets
* Protective Plastic Tube End Caps - All Open Ends
* Standard Thread Plated Hardware Kit with Retaining Nuts & Protective SS Washers
* Quick Assembly Wrench included
* Heavy Duty Poly Rope for Main Cover Tie Down
* Heavy Duty Grommets on Cover & Doors
* Assembles in 2 hrs.
* Two Box Shipment - easily unloaded and transported (As shown below)

STANDARD SPECIFICATIONS:
Nominal Size - 12' Wide x 24’ Long x 8' High
Arches - Seven (7) on 48" spacing 1-5/8" diameter frame members
Standard End Door Size - 12' wide x 6' 6" height at edge double zipper door each end
Available Colors - Outer Colors: Grey / Green All Interiors: White Only
Shipping Weight - 344 Lbs. in Two (2) boxes shipped via motor freight
Box Dimensions - Box 1: 63.5" Long x 17.5" Wide x 8" High Box 2: 67" Long x 21.5" Wide x 8.5" High
Main Cover - UV protected 24 mil, fabric backed poly. 10oz. weight
Fire Retardant Standard

More Information

8x8x8 - SOLD

BLOWOUT SALE!
Green

More Information

MSL 6.5x16

  • All Aluminum Construction
  • 5/4" PT Decking
  • Torsion Ride Axles
  • Integrated Aluminum Bi-Fold Rear Ramp
  • Integrated Aluminum Side Ramp
  • Fixed 1.5"x1.5" Aluminum Rail Kit
  • Welded Aluminum Fenders
  • 1500# Wheel Jack
  • VIN# 66012

    More Information